GEO-Fabrics-COL-Logo-155x45.png (1)
Vacuum Forming

Vacuum forming is a simplified version of thermoforming, whereby a sheet of plastic is heated to a forming temperature, stretched onto a single-surface mould, and forced against the mould by a vacuum (suction of air).

Vacuum Formed Plastics

An alternative to vacuum forming involves a continuous process where semi-molten polymer is formed between two corresponding rollers with male and female forming points. Geofabrics manufactures cuspates using both technologies.
There are several aspects that will determine the properties of the finished cuspate: The polymer. The additives. The sheet thickness. The shape and size of the cusp.

View our Technical Hub

Industry News

ISO 14001 & 9001 Certification

GEOfabrics certified to ISO9001 and ISO14001

Flood and Coast Telford

Future Landscape and Playspaces 2023

Recent Tech Papers

Root Barriers Comparison Report

Geocomposite to Prevent Pumping Failure

CuTex Root Barrier Effectiveness Report

Development of Geocomposite to Prevent Mud Pumping

Geocomposite Material In Landfill Containment

Geosynthetics in Coastal Engineering Protection

Difficulties with Unit Weight

Designing with the Cylinder Test

Recent Downloads

Installation Guides & Certificates

ISO 14001 & 9001 Certificate

Case Studies

Culemborg Geldermalson Rail Inspection Pad—RK12 Drainage Geocomposite

Design Information

LFX Stone Selector Guidance

Design Information

Cylinder testing geomembranes and their protective materials: LFE2

TrackTex Anti-Pumping Geocomposite

TrackTex G Dual DoP No112-2022-02-21

TrackTex Anti-Pumping Geocomposite

TrackTex Dual DoP No043-2022-02-21

Design Information

Introduction to Geosynthetics

Rail Rig Laboratory Test

View
Case Studies

Geotextiles for Coastal Protection – HPS14C Case Study

GEOfabrics HPS14C has been successfully installed below the rock armour at Withernsea. Nearly 70,000 t...

Urban Greening Project – Rome

Municipio Roma VII is the most heavily populated Municipio in the Italian Capital with more than 300,0...

Residential Root Protection – CuTex Case Study

As part of a wider contract PBA Solutions were responsible for the design and installation of a tree r...

Old Colwyn Case Study – HPS17C Coastal Protection

Geofabrics HPS17C has been successfully installed below the rock armour on Old Colwyn Promenade Coasta...

Rock Armour Geotextile Filters – A19 Case Study

On 18th February 2020, the A19 was closed between Chapel Haddlesey and Eggborough, due to collapse fol...

GEOfabrics Laboratory – UKAS Accreditation

Our onsite laboratory is accredited by UKAS to ISO 17025:2015 for the competence in testing to several...
Find out how GEOfabrics can help you
Contact us for more information and assistance.

View our
Product Categories

GEOfabrics has a range of products across a variety of different sectors

Cuspates

Geocomposites

Geotextiles

View Sectors

GEOfabrics cover a wide range of sectors.

Root barriers

Construction

The construction industry is under ever increasing legislative and commercial pressure which require innovative appro...

General Civils

The use of geosynthetics in civil engineering applications has continued to grow exponentially over the last two deca...

Landfill

The design of an engineered waste containment system is considered a continuous project, including all operational ac...

Coastal & River Defence

Marine erosion can occur when the sea is energised by wind and gravity to produce waves, tides, and currents: it is c...

Rail

Geosynthetics have been employed to perform a number of functions in track construction and rehabilitation for almost...
Discover how GEOfabrics can help you today
Contact us for more information and assistance.